The power generation of a photovoltaic power station not only depends on the power generation performance of the photovoltaic power station itself, but also is closely related to the later operation and maintenance. Correct operation and maintenance can not only increase the power generation, but also greatly improve the service life of the equipment and power station. Let's discuss the main facto...
Definition of state of charge (SOC) and depth of discharge (DOD) and their impact on lifespan of lifepo4 battery 1. State of Charge (SOC, State of Charge): In layman's terms, it is the ratio of the power stored in the battery (releasable capacity) to the maximum power that the battery can store. For example, if a battery with a maximum capacity of 100Ah(fully charged) is fully discharged to 5...
First of all, the basis of the working principle of solar cells is the photovoltaic effect of the semiconductor PN junction. The so-called photovoltaic effect is an effect in which electromotive force and current are generated when the object is illuminated, the state of charge distribution in the object changes. When sunlight or other light hits the PN junction of the semiconductor, a voltage app...
The large number of solar panels installed in the early 2000s is approaching the end of its life cycle, which poses a serious problem for the solar industry, and current solar panel disposal methods fall far short of environmental requirements. In theory, solar energy is more promising than ever. Solar cells are getting easier and cheaper to produce. But solar PVs have some less-talked-about quest...
Loads are classified into resistive loads, inductive loads, and capacitive loads according to their impedance properties. Resistive load: A load with no phase difference between current and voltage is a resistive load, such as rice cookers, light bulbs, electric stoves, electric soldering irons, etc. Inductive load: The load when the current lags the voltage by a phase difference is an inductive l...
Energy storage converter, also known as bidirectional energy storage inverter, English name PCS (Power Conversion System), is used in AC-coupled energy storage systems such as grid-connected energy storage and micro-grid energy storage, connecting battery packs and power grids (or load), it is a device that realizes bidirectional conversion of electric energy. It can not only invert the DC power o...
1. In order to prevent the photovoltaic modules from being hit by heavy objects, can a wire protection net be added to the photovoltaic array? Answer: It is not recommended to install wire protection nets. Because the addition of iron wire protection net to the photovoltaic array may cause partial shadows on the solar panels and form a hot spot effect, which will affect the power generation effici...
The warranty of a solar system involves solar panels, inverters, installations and various other components. Owners always want to be effectively guaranteed throughout the life cycle of the solar system, and they know that it is important to choose the right solar panels and inverters. , it is also important to know that these components are properly installed. But when it comes to warranty, there...
There are various currents inside the cell, such as dark current, reverse current, leakage current, etc. Various currents have a greater or lesser impact on the power of solar panels. Distinguishing the characteristics of various currents can identify the cause of abnormal solar panel power and help solve the problem completely. dark current Dark current (DarkCurrent), also known as unilluminated ...
The power factor of the photovoltaic grid-connected inverter is a point that has to be mentioned in the technical parameters. In an AC circuit, the cosine of the phase difference (Φ) between the voltage and the current is called the power factor, which is represented by the symbol cosΦ. In terms of value, the power The factor is the ratio of active power to apparent power, that is, cosΦ=P/S. Gener...
At present, there are many models of inverters on the market. In order to simplify management and explore the advantages of centralized procurement, many EPC manufacturers often use limited inverter models to do as many field designs as possible, which will inevitably involve the reduction of inverters. Content usage issues. A small reduction in capacity is not a big problem; but a large reduction...
Photovoltaic inverters are composed of circuit boards, fuses, power switch tubes, inductors, relays, capacitors, displays, fans, radiators, structural parts and other components. The service life of each component is different. The service life of the inverter can be explained by the "barrel theory". The maximum capacity of the barrel is determined by the shortest board, and the service life of th...