The nominal voltage of the lithium iron phosphate battery is 3.2V, the high end charge voltage is 3.6V, and the low end discharge voltage is 2.0V. Due to the different quality and process of positive and negative electrode materials and electrolyte materials used by various manufacturers, there will be some differences in their performance. Take 12.8V100AH for example: 1. Lithium iron phosphate ba...
PID effect is Potential Induced Degradation. The direct harm of PID to the module is that a large amount of charge accumulates on the surface of the cell, which aggravates the passivation effect of the cell surface, resulting in a decrease in the fill factor, open-circuit voltage and short-circuit current of the cell, and the power of the cell module is attenuated, and the attenuation degree can r...
When designing the inclination of the photovoltaic array, there is a big difference between the grid-connected power station and the off-grid power station, because the goals pursued by the grid-connected power station and the off-grid power station are different when generating electricity. The goal of grid-connected power stations is to maximize the annual power generation, that is, the design o...
In general, we call the process of converting DC power into AC power as inverter, the circuit that completes the inverter function is called inverter circuit, and the device that realizes the inverter process is called inverter equipment or inverter. Why are common grid-connected inverters only single-phase and three-phase? In fact, the main reason is the type of grid connected to the inverter. Fi...
The power generation of a photovoltaic power station not only depends on the power generation performance of the photovoltaic power station itself, but also is closely related to the later operation and maintenance. Correct operation and maintenance can not only increase the power generation, but also greatly improve the service life of the equipment and power station. Let's discuss the main facto...
Definition of state of charge (SOC) and depth of discharge (DOD) and their impact on lifespan of lifepo4 battery 1. State of Charge (SOC, State of Charge): In layman's terms, it is the ratio of the power stored in the battery (releasable capacity) to the maximum power that the battery can store. For example, if a battery with a maximum capacity of 100Ah(fully charged) is fully discharged to 5...
The power generation of photovoltaic power plants is determined by many factors, among which the key factors are irradiance and ambient temperature. Hot summer is often accompanied by high temperature, not high irradiance. The temperature characteristics of solar modules are negative temperature coefficients, and the power generation performance of modules will decrease as the temperature increase...
First of all, the basis of the working principle of solar cells is the photovoltaic effect of the semiconductor PN junction. The so-called photovoltaic effect is an effect in which electromotive force and current are generated when the object is illuminated, the state of charge distribution in the object changes. When sunlight or other light hits the PN junction of the semiconductor, a voltage app...