The dust falling on the surface of the photovoltaic module will block the sunlight on the one hand, reduce the transmittance of the surface glass of the photovoltaic module, and reduce the amount of solar radiation irradiated on the surface of the solar panel; It absorbs solar radiation and converts it into its own heat energy, and at the same time blocks the external heat dissipation of the photo...
1 Photovoltaic connectors and power station benefits Usually, photovoltaic modules, inverters and combiner boxes are the main focus of daily maintenance of photovoltaic power plants, while the failure risk of some small components is easily overlooked, and photovoltaic connectors are the most representative cases. The photovoltaic connector accounts for less than 0.5% of the initial investment cos...
PID effect is Potential Induced Degradation. The direct harm of PID to the module is that a large amount of charge accumulates on the surface of the cell, which aggravates the passivation effect of the cell surface, resulting in a decrease in the fill factor, open-circuit voltage and short-circuit current of the cell, and the power of the cell module is attenuated, and the attenuation degree can r...
As the "heart" of photovoltaic power generation, the health of the inverter is closely related to the smooth operation of the photovoltaic power generation system. It is necessary to understand common inverter alarms and accurately determine the cause of inverter alarms. 1. Inverter alarms not caused by internal devices If the screen or APP shows that the EEPROM fails, it can usually be repaired b...
When designing the inclination of the photovoltaic array, there is a big difference between the grid-connected power station and the off-grid power station, because the goals pursued by the grid-connected power station and the off-grid power station are different when generating electricity. The goal of grid-connected power stations is to maximize the annual power generation, that is, the design o...
In the photovoltaic power station system, the grounding design is a crucial part of the electrical design, which is related to the safety of the power station equipment and personnel. Good grounding design can ensure that the power station is in a safe operating environment for a long time, reduce the frequency of faults, and improve the overall operating efficiency of the power station. Therefore...
The power generation of a photovoltaic power station not only depends on the power generation performance of the photovoltaic power station itself, but also is closely related to the later operation and maintenance. Correct operation and maintenance can not only increase the power generation, but also greatly improve the service life of the equipment and power station. Let's discuss the main facto...
The power generation of photovoltaic power plants is determined by many factors, among which the key factors are irradiance and ambient temperature. Hot summer is often accompanied by high temperature, not high irradiance. The temperature characteristics of solar modules are negative temperature coefficients, and the power generation performance of modules will decrease as the temperature increase...